What is the quality of the processed parts of the sheet metal chassis?
Today we will explain to you how to judge the quality of cabinet sheet metal processing. We mainly look at four aspects: look at spray paint, steel plates, and accessories.
1. Look at the spray paint of the sheet metal processing on the surface of the cabinet. All the steel materials of a good cabinet need to be painted and sprayed evenly, so as to achieve good rust and dust prevention.
2. Look at the thickness of the steel plate. Just tap it with your finger to know the thickness of the steel plate. The brackets inside the cabinet are also thicker, because sometimes the equipment inside is heavier, and if it is too thin, it will not be able to bear the equipment. The weight of it.
3. The accessories in the cabinet are also very important. If the cabinet is equipped with a cable management module so that the cables can be directly fixed in the vertical mounting rail, it would be great. In either case, the upper and side walls inside the cabinet should have enough fixing rings (to protect the cables). You can also lift the cabinet bottom plate to facilitate cable routing below. There are also some screws, nuts, etc. used to fix the rack, but also enough. This can avoid the trouble of insufficient accessories caused by future expansion.
For more news about the sheet metal processing industry, please consult Shandong Guermei. Shenzhen Huifuda Precision Metal Products Co., Ltd. has been specialized in sheet metal processing for decades. It is a company specializing in the research and development, production, A high-tech enterprise integrating sales and service.