Let the chassis processing factory analyze the barriers of the barriers and the ways to eliminate them

Let the chassis processing factory analyze the barriers of the barriers and the ways to eliminate them

For general simple barrier faults, you can follow the following 4 methods to solve them. If your barrier has other than the following 4 faults, it is recommended to ask professionals to repair it. Let me introduce how to troubleshoot!

1. Trouble phenomenon: unable to lift and lower the lever;

Elimination method: Measure whether the voltage is within the range of 220V±10V;

2. Failure phenomenon: the brake lever does not rise and fall in place or shake too much;

Reason for detection: Check whether the magnet of the operating switch is adjusted well and whether the tension of the balance spring is too loose or too tight. 　　 Remedy: adjust the position of the stroke control and tighten the tension spring link bolt;

3. Failure phenomenon: abnormal noise in the chassis;

Reason for inspection: Check whether the bearing and active link part are abnormal;

The analysis method of the barrier failure of the barrier is introduced here. Friends who need cooperation can consult Shenzhen Huifuda Precision Hardware Products Co., Ltd.!