How to maintain pedestrian gates

How to maintain pedestrian gates

Many users have little or no maintenance on the turnstile. Some users who have been maintained and maintained do not understand the correct maintenance method. They only think of the manufacturer when the machine is broken, and then replace parts. , There is no maintenance at all in normal times. It may be due to a little problem that will affect the service life of the entire gate and cause unnecessary economic losses. Therefore, first of all, we must understand the importance of later maintenance of the gate, and To understand the correct use and maintenance methods.

Next, follow us to see how to maintain the pedestrian gates!

Pedestrian gates are composed of the barrier housing, movement, swing arm and internal control accessories, so the maintenance is divided into three steps, one: external cleaning; second: maintenance of the movement; third: attention to internal control accessories matter.

1. External cleaning

The enclosure of the pedestrian passage gate is generally made of stainless steel and acrylic/glass. It is recommended to clean the exterior once a week. The tools used to clean the surface of the pedestrian passage gate are: soft cloth, talcum powder and anti-rust oil. Use a soft cloth to clean the dust on the surface to prevent dust from falling into the chassis through the infrared hole, thereby avoiding the control panel from malfunctioning; use talc again Use powder to polish the exterior of the chassis. If possible, you can add another step, which is to coat the surface of the chassis with anti-rust oil. Note that the newly applied anti-rust oil should not be wiped by hand. You can use it after 3-5 hours of natural air drying. Touch, otherwise it will destroy the anti-rust effect.

The above is for the daily maintenance methods that have not had any problems just after using the turnstile. Some of them have rust spots on the surface after a long time.

How to deal with the turnstile? If it is used for a long time, especially the turnstile used outdoors, some rust spots may appear. To remove the rust spots, you can use sandpaper and talcum powder to rub along the long lines, otherwise it will affect the appearance. If the surface is painted or sprayed, wipe off the dust on the surface with a soft cloth. If there are exposed scratches, use the same color of paint to repair it. When applying, be careful not to apply the infrared pair to the perforation, otherwise the gate will give a false alarm. Cause unnecessary trouble.

Second, the maintenance of the movement

The movement is the heart of the entire turnstile. It must be maintained well. It is recommended to be maintained once a month. Here we take the three-roll gate as an example. The maintenance method: first, cut off the power, open the cover of the pedestrian passage gate, clean the surface dust, clean the transmission part first, and then add butter; secondly, check whether the fasteners and connecting rods have If it is loose, tighten it. Check the wear of the vulnerable parts. When the gap between the positioning arm of the three-roll gate and the positioning plate is 3mm, it must be replaced in time to maintain the normal gap. Add grease to the solenoid valve core to make the solenoid valve move left and right. When reducing resistance, it plays a role of lubrication. Be careful not to add too much, and add according to the situation; in addition, pay attention to the limit switch and limit piece of the three-roller gate not to be adjusted casually, in case the adjustment is too far or too close to cause errors .